The Blue-Tip Screwbolt’s resistance to vibration and superior holding power ensures that the anchor remains secure when subjected to the considerable forces imparted during normal operation of jig equipment.

Download further information [7897]

Incorporating unique dual-action teeth and DIY simplicity the Heller Ratio Drilling System significantly reduces the time and cost involved in large diameter concrete coring. The Heller Ratio Drilling System may be used with any standard drilling machine and are easily disassembled for compact stora

Download further information []

The installation of a steel plate protecting wall, to upgrade the Nunawading Transfer Station’s waste pit, is an excellent example of the ACRYLIC-100®’s performance, economy and convenience. Its superior strength allows shallower embedment for the same load, saving material.

Download further information []

In December 1997, Powers Fasteners were awarded the contract to supply over 7000 High Performance stainless steel Socket Anchors to Transfield Obayashi Joint Venture. The tender package also called for the complete fastening system to be installed quickly and safely. Seven, Australian made, purpose

Download further information []

POWER-FAST™ Epoxy, and POWER-BOLT® Safety anchors were specified by the RSA for the entire electrical fit-out of the New Southern Rail Link requiring more than 22,000 high performance adhesive and mechanical anchoring systems.

Download further information []

Decorative sound barriers installed along an elevation section of the M4 Motorway in Sydney were recently installed using the new patented Chem-Bolt® with Power-Fast™ adhesive injection gel. The Chem-Bolt® / Power-Fast™ anchoring system was chosen by RTA bridge designers for it’s ease of use, superi

Download further information []

Powers Fasteners has established an enviable reputation on this major construction site in Melbourne, with its high performance Powerfast Epoxy Injection Gel adhesive system, by providing a solution for a difficult problem in the installation of the façade support structure.

Download further information []

The SFS SX6/D12/A10/5.5/28 self-drilling stainless steel screw has the ability to screw through 6mm steel without a pilot hole, decreasing the labour content considerably. The low head profile exactly matched what the designers were looking for in aesthetic appearance, and being 316 stainless steel,

Download further information []

The Forming SPIKE® was used for this application due to its speed of installation, its ease of removal, reusability and that there is no metal left in the hole to corrode later. Building Durability Group enquired about options for a safe, quick and efficient temporary method of attaching the form to

Download further information []

The Northside Storage Tunnel Project consisted of the construction of two tunnels at a depth of 40m - 100m below sea level. The major tunnel runs 16km from Lane Cove to Manly with the second tunnel branching off the main tunnel at Tunks Park to go 3.7km to Scotts Creek.

Download further information []

The SFS intec SX14 L12 irius drive self drilling screw was chosen for its highly aesthetic finished head style and the significant labour cost saving achieved as the stainless screws could be installed without pre-drilling the steel.

Download further information []

This is an excellent example of the versatility offered by using the Power-Fast PLUS® epoxy injection gel. Easily installed by using a Powers pneumatic application gun.

Download further information []

Because Warragamba Dam and its catchment provides drinking water to over 80% of Sydneysiders, heavy emphasis was placed on use of environmentally friendly products and safe work practices. Products such as Acrylic AC100® and Power-Fast® adhesives were used.

Download further information []

The M5 East required the construction of 6 road interchanges, 5 road bridges, 4 pedestrian underpasses, two 4km driven / cut traffic tunnels and a cut and cover crossing at the Cooks River. Powers Fasteners was heavily involved at all facets of this project providing information and advice at design

Download further information []

Suspended services from thin structural steel roof purlins are often a concern, particularly when heavier load suspensions are required such as cable tray, pipe work or ductwork. Powers Fasteners provided yet another fast, cost effective problem solving fixing system that could not be matched from a

Download further information []

Powers Fasteners’ experience in providing fastening solutions in tunnel projects has once again proved to be the winner when put up against the competitors’ offering.

Download further information []

Powers Fasteners innovative Chem-Bolt system was the perfect high performance anchoring solution for the temporary “Tilt Panel” foot anchoring at the new Silver-Field West water drainage project in New Zealand’s North Island.

Download further information []

A large Australian Mining Co. commissioned the construction of 25 steel frame homes in Port Hedland via Pilbara Constructions. The construction of these homes required high strength tie down fixings able to withstand cyclonic winds and the harsh elements that exists in Port Hedland.

Download further information []

Powers latest adhesive development PowerStick™ has delivered a quality solution to a difficult application. Owner Builder Mr Gary Motton wanted to achieve a "fastenerless" finish to his miniorb cladding on the lifestyle cabins....

Download further information []

Westlink M7 – Orbital Ring Road, 40km dual carriageway, 17 interchanges, 38 overpasses and a 40km shared cycle/pedestrian pathway

Download further information []

Westlink M7 – Orbital Ring Road, 40km dual carriageway, 17 interchanges, 38 overpasses and a 40km shared cycle/pedestrian pathway

Download further information []

Westlink M7 – Orbital Ring Road, 40km dual carriageway, 17 interchanges, 38 overpasses and a 40km shared cycle/pedestrian pathway...

Download further information []

Fairbrother Pty Ltd, in partnership with John Holland Pty Ltd, was awarded the $58.0M construction of the Tasmanian Prisons Redevelopment Program (Stage C) at Risdonvale in November 2003...

Download further information []

When planning began in 1997 for the future development of the Airport, projected passenger numbers of 9 million were forecast to be reached over the next decade...

Download further information [786963]

A 2 year construction project costing US$375 million, totaling 500,000 sq meters of prime land, is the home to over 250 famed international and local brands under one roof...

Download further information []

Powers Fasteners have been involved in the cutting edge of Rail technology fastening in Western Australia. By far the largest infrastucture project to be built in the Perth vicinity for many years has been the Perth-Mandurah railway line.

Download further information []

The latest technology in High Powered Concrete Gas

Download further information [175191]

Powers Trigger Foam at the new DFO Project

Download further information [172536]

From start to finish the Gatton prison saw an array of Powers products used across many trades and applications.

Download further information []

Download further information []